Docomo Style series F-10C Instruction Manual page 121

Setting the dialup connection (APN)
❖
The dialup connection (APN) and registration number (cid)
The dialup connections (APN) for packet communication can be set for registration numbers (cid) between
1 and 10 in FOMA terminal. By default, "mopera.ne.jp" (APN) to connect to mopera is registered in cid1,
"mopera.net" (APN) to connect to mopera U is registered in cid2 and 3, and "mpr.ex-pkt.net" (APN) to
connect in 128K communication is registered in cid4. For connecting to other providers or corporate LANs,
register APN for cid5-10.
For the dialup connections (APN), inquire your provider or network administrator.
For USB cable connection and Bluetooth connection, setting each dialup connections (APN) is required.
For packet communication, if switching between USB cable connection and Bluetooth connection,
setting the dialup connections (APN) is required again.
The dialup connection settings can be considered as phonebook entries registered for packet
communication. The comparison between dialup connection settings and FOMA terminal phonebook is
as shown below.
Connection (APN)
Registration number (cid)
Connection name (APN)
99 <cid># (packet communication)
The registered cid become the connection number in the dialup connection numbers setting.
❖
Setting the dialup connection (APN)
<Example> Setting under Windows XP
1
Click "
(Accessories)"
(Hyper terminal)".
2
Enter the desired dialup connection name in "
The following characters (one-byte) cannot be
used in " (Name)".
/: ?<>
Registration number (Phonebook No.)
Party's name
Party's phone number
(Start)" Select "
" (Communication)" and click "
Phonebook item
(Name)"
16
(All programs)" "
Click "OK".