Shallow Water Operation - TOHATSU MFS 50A Owner's Manual

ENOM00068-A

9. Shallow water operation

ENOW00051-0
WARNING
During shallow water operation, be careful
not to place your hand between the swivel
bracket and the clamp bracket. Be sure to
tilt the outboard motor down slowly.
ENOW00053-0
CAUTION
While in shallow water drive position, do
not operate the outboard motor in Reverse.
Operate the outboard motor at slow speed
and keep the cooling water intake sub-
merged.
ENOW00054-0
CAUTION
Do not overtilt outboard motor when driv-
ing shallow water, or air may be sucked
through water inlet, potentially leading to
engine overheating.
ENOM00880-A
Gas assist type
1. Move (UP) lock lever to "Free" position.
Tilt up outboard motor into desired
shallow water running. While keeping
the outboard motor in the desired shal-
low water running position, move
(DOWN) lock lever "Lock" position.
ENGINE OPERATION
1. Free position
2. Lock position
2. Return to normal running position
Move (UP) lock lever to "Free" position.
Outboard motor moves down to thrust
rod.
Move (DOWN) lock lever to "Lock"
position.
ENOM00069-A
Power Trim & Tilt type
1. Operate the Power Trim & Tilt switch
and tilt the outboard motor up into
desired shallow water running position.
UP
DN
55
1 1
2 2
ENOF00064-A
UP
DN
ENOF00067-A
ENOF00067-0