Tiller Handle Type - TOHATSU MFS 50A Owner's Manual

40
ENGINE OPERATION
i n g i m p o s s i b l e a n d / o r d a m a g i n g t h e
starter.
If cranking over 5 seconds fails to start
engine, return main switch to "ON", and
crank engine again after 10 seconds or
more.
This model is provided with start in gear
protection.
ENON00010-0
Note
Start-in-gear protection prevents engine
from starting at other than neutral shift. In-
gear starting of engine will move the boat
immediately, potentially leading to falling
down or causing passenger(s) to be thrown
overboard.
ENOW00031-0
CAUTION
If the engine starts in gear, do not use it.
Contact an authorized dealer.

Tiller handle type

1. Be sure to install the stop switch lock
to the stop switch, and attach the stop
switch lanyard securely to the operator
or to the operator's PFD (Personal Flo-
tation Device.)
1. Stop switch lock
2. Insert the main switch key.
3. Set the control lever in the Neutral
position.
1. Shift lever
4. Set the throttle grip to START position.
5. Turn the main switch key to ON posi-
tion and confirm three warning lamps
light up with buzzer sound and then go
off.
6. Turn the main switch key to START
position and release the key when the
1
engine has started. The key returns to
the original position, automatically.
ENOF00864-0
N
1
F
R
1
ENOF00865-0
ENOF00866-0