TOHATSU MFS 50A Owner's Manual page 48

Hide thumbs Also See for MFS 50A:
Table of Contents

Advertisement

48
ENGINE OPERATION
1. Control lever
2. Mine switch key
1. Put the control lever in the Neutral
position and run the engine for 2-3
minutes at idling speed for cooling
down if it has been running at full
speed.
2. Turn the main switch key to the OFF
position.
ENOW00869-0
WARNING
After stopping the engine, close the air
vent screw on the tank cap.
Disconnect the fuel connector of the
engine and the fuel tank.
Disconnect the battery cord, after each
use.
Emergency engine stopping
Press the emergency stop switch or
remove stop switch lock to stop the
engine.
ON
START
OFF
2
ENOF00882-0
N
R
1
2
1. Stop switch
2. Stop switch lock
2
1. Stop switch
2. Stop switch lock
ENOM00910-0
Spare emergency stop switch lock
A spare emergency stop switch lock is
provided in the tool bag.
When used as described, the emergency
stop switch clip and emergency stop
switch lanyard system stops the engine if
the operator falls away from the controls.
When an operator falls into water, be sure
to use emergency stop switch lock of the
spare.
Be sure to confirm the spare stop switch
lock is in the tool bag before begin to oper-
ate.
F
ENOF00883-0
1
ENOF00884-0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfs 40a

Table of Contents