Fuel Tank - TOHATSU MFS 50A Owner's Manual

Hide thumbs Also See for MFS 50A:
Table of Contents

Advertisement

Install fuel filter with all related parts in
place, or fuel leak could occur, leading
to catching fire or explosion.
Check fuel system regularly for leakage.
Contact authorized dealer for fuel sys-
tem services. Services by unqualified
person could lead to engine damage.
ENOM00094-0
Fuel filter (for engine)
1. Check in the cup for water and debris.
1
2
3
4
5
6
1. Body
2. O-ring
3. Filter
4. O-ring
5. Float
6. Cup
7. Arrow to indicate fuel flow direction
2. If present, disconnect hoses from the
fuel connector (male) and the fuel
pump.
3. Remove the cup, filter and O-rings
from the fuel filter body.
4. Check the wear and clogging for each
parts, and replace if necessary.
5. Remove fuel and any water or debris
from the cup, filter and hoses.
6. Reassemble all parts.
ENOM00096-0
Fuel filter (for fuel tank)
1. Remove the fuel pickup elbow of the
fuel tank by turning it counterclockwise
2. Clean the fuel filter or replace it if nec-
essary.
3. Reassemble all parts.
ENOM00097-0

Fuel tank

Water or dirt in the fuel tank will cause
engine performance problems.
Check and clean the tank at specified
times or after the outboard motor has
7
been stored for a long period of time (over
three months).
ENOF00096-A
1. Fuel pick up
2. Filter
ENOM00098-A
Gear oil replacement
ENOW00094-0
Be sure that outboard motor is secured
to transom or service stand, or acciden-
INSPECTION AND MAINTENANCE
WARNING
73
1
2
ENOF00926-0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfs 40a

Table of Contents