Table of Contents
Advertisement
CONFIGURING SETTINGS FOR THE BENEFON TRACK PRO
Disconnecting the phone
from the software
1. Choose
from the
Disconnect
Or, click the button
2. Press and hold down the release button while re-
moving the BW cable from the phone. (The release
button is located on the top of the flat end of the
BW cable.)
3. Gently pull the BW cable from the system connec-
tor (located at the bottom of the phone).
12 ACTIVATING NEW FEATURES
menu.
Mobile
Disconnect
on the toolbar.
ACTIVATING NEW FEATURES
Some of the new features are sold separately, they
are not included in the basic NT 2.0 software package.
Such features are, e.g. Waypoint tracking, CSD trace
download, Encryption, Vertical sensor and Update of
an old software into the new NT 2.0 software.
When you purchase these new features, a
is provided to you by the dealer or the man-
vation key
ufacturer. The key is needed for activating the
features. Activation can be easily done with the Bene-
fon Configurator.
1. First make sure, the phone has cable connection to
the Benefon Configurator.
2. Click Connect.
3. Select
Save activation key
4. Key in the
Service activation
updating the software, the phone may inform you
of the incorrect software version. You have then
less than 2 minutes time to key in the activation
key until the phone will power off itself. The key
can be stored while the software is still reading da-
ta.)
5. Click Save.
6. Click Disconnect.
Service acti-
from the
Mobile
menu.
key. (Note that when
Advertisement
Table of Contents
