Table of Contents
Advertisement
CONFIGURING SETTINGS FOR THE BENEFON TRACK PRO
B: THE BENEFON CONFIGURATOR
SOFTWARE AND LOCAL CONFIGURATION
The Benefon Configurator software is intended for
configuring settings locally for the Benefon products,
e.g. Track Pro.
This configuration manual contains features available
for the Track Pro NT 2.0.
Since the Benefon Configurator is very easy to use, it
is advisable to make initial and other major configu-
rations for the phone with this software.
When you are finished with editing the settings, you
can either transfer the settings back to the phone via
the BW cable immediately, or save them in a comput-
er disk (as any normal file) for further use.
Another, slightly quicker way to transfer configura-
tions made by Benefon Configurator is to use some
other application, e.g. the SetupLoad software. For
more information on it, please contact your dealer.
8 B: THE BENEFON CONFIGURATOR SOFTWARE AND LOCAL CONFIGURATION
The Benefon Configurator application window is split
up in two sections:
• The Benetree structure is located on the left. It con-
sists of two main nodes: My Benefon (on-line) and
My Computer (off-line). By clicking the main nodes,
you have access to their sub-nodes. The software
consists of several groups of settings mainly struc-
tured as sub-nodes, such as:
books,
User
settings,
Telematics
and so on. By clicking the sub-nodes, you have
access to the corresponding Benefon Configurator
document files.
• The Document window is located on the right. The
setting groups may be divided up into interleaves
including several separate data fields, such as
ing
settings,
Emergency
settings,
Protocol settings
Short
messages,
settings,
GPS settings
settings,
GPS
settings,
Message
and so on.
Phone
Track-
Advertisement
Table of Contents
