Nmea Output; Gps Tuning - Benefon Track Pro Configuration Manual

CONFIGURING SETTINGS FOR THE BENEFON TRACK PRO

NMEA output

The NMEA port output can be turned on or off. This
phone supports a subset of NMEA 0183 v2.0 output
protocol, which is used for transferring position data
between the phone and a navigation system, such as
a Search and Rescue application.
For the connection you also need a BW cable (an ac-
cessory).
Click the arrow and highlight the desired option (3).
• By selecting Off, you will turn the NMEA output port
off.
• By selecting a transferring speed you will turn the
NMEA output port on.
NOTE: When the
NMEA output
will consume slightly more power.
is turned on, the phone

GPS tuning

You can set tuning values for the GPS receiver. De-
pending on selected value, the GPS prioritizes preci-
sion over fastness or vice versa.
Set the value by clicking the arrow and highlighting
the desired option (4).
• Quick: The GPS is tuned for fast position fix. The
receiver can acquire position fix quite fast in moder-
ate or good conditions. Position can be acquired
even in a bad satellite coverage, but the accuracy
might not be so good.
• Precise: The GPS is tuned for high accuracy. How-
ever, acquiring the position fix might take time and
can be problematic in a bad satellite coverage.
The GPS tuning values can also be set from the GPS
menu of the phone.
TELEMATICS: GPS 47