Tracking; D U R A T I O; I N T E R V A; A C T I V A T I O - Benefon Track Pro Configuration Manual

CONFIGURING SETTINGS FOR THE BENEFON TRACK PRO

Tracking

When the tracking function is turned on, the position
information is sent to the service center several times
in sequence.
D U R A T I O N
You can select, for how long or on what terms tracking
will be on (1a). After that, the tracking will be turned
off automatically. Click the arrow and highlight the
desired option.
• Continuous: The tracking will be turned on until fur-
ther notice. !Deactivation message must be sent
separately.
• Amount of sent messages: Tracking will be on until
defined amount of messages has been sent to the
service center. Key in the amount and confirm your
choice.
• Duration: Tracking will be on for a period of time.
Key in how many days, hours and minutes, the
tracking should be on.
• time: Tracking will be on until the end time is
End
reached. Key in the date and time, the tracking
should be turned off. Date and time can be selected
by clicking the arrows, as well.
24 TELEMATICS: SURVEILLANCE
I N T E R V A L
The given interval, e.g. 60 minutes, indicates that the
phone will send its position to the service center at in-
tervals of 60 minutes.
Key in the tracking interval in minutes (1b).
A C T I V A T I O N
Make sure all the required settings for tracking are
completed before activating the function. Such set-
tings are, e.g. duration and interval. New settings can
be applied only while the tracking is deactivated.
In some phone models, e.g. in Track, tracking can be
initially activated or deactivated from the phone
menu. In this case, activation is completed only after
the service center sends an acknowledgement mes-
sage to the phone.
In some phone models tracking activation or deacti-
vation cannot be initiated from the phone menu at all.
In this case tracking is always activated or deactivat-
ed by sending an MPTP message to the phone from the
service center.