Table of Contents
Advertisement
CONFIGURING SETTINGS FOR THE BENEFON TRACK PRO
Settings for manual power on and off
•
No restrictions
(1a) - The phone can be turned on and
off as usual. The service center will NOT be notified
of the power on/off.
•
(1b) - The service center will
Notify service center
always be notified when the phone is powered on or
off. Notifying means sending a protocol message to
the service center.
•
(1c) - The phone cannot be powered off
No power-off
normally (by pressing
powers off for some reason (e.g. Low battery), the
phone will send a protocol message to the service
center.
Settings during battery charging
C H A N G E G P S O P E R A T I N G M O D E
You can select, which one of the GPS power modes is
on while the phone is being charged.
Click the arrow and highlight the desired option (2a).
By selecting
No
change, the GPS mode remains in the
previously configured operating mode (i.e. its normal
operating mode).
50 TELEMATICS: POWER
/
). Moreover, if the phone
Set the GPS
Off
in case
• the time reserved for charging is quite short, or
• GPS functions are not needed during charging pro-
cess.
N O T I F Y S E R V I C E C E N T E R W H E N C H A R G I N G
By checking the box (2b), the phone will notify the
service center in case the phone is connected to a
charger or disconnected from it.
Notifying means sending a protocol message to the
service center, including the latest position.
Notify service center of battery status
By checking the box (3), the service center will be no-
tified of some events occurred in battery status.
Notifying means sending a protocol message to the
service center, for example in these cases: Low bat-
tery, temperature too warm/too cold for charging or
using battery, battery failure.
Advertisement
Table of Contents
