Table of Contents
Advertisement
CONFIGURING SETTINGS FOR THE BENEFON TRACK PRO
Error reports
You can set the phone to inform of errors occurred in
MPTP messaging (6). An error can be, e.g.
- Failure in message transmission: E.g. the phone
is unable to transfer trace log
- Misspelling: The phone detects that a command
string is uncorrect
- Errors in logic (illegal actions): You try to turn a
function on when, in fact, the function is already
turned on.
Depending on current authorization setting, the
phone will send error reports to the
ber, some other authorized number or requesting
number. For more information, see
and
PAGE 29
SERVICE CENTER NUMBER ON PAGE 32
ICS: AUTHORIZED NUMBERS ON PAGE 44
NOTE: If sending of
Trace log
form of failure only under these circumstances:
- The
Trace sms number
-
Error reports
data field shows
For more information, see
Service center num-
AUTHORIZATION ON
and
TELEMAT-
.
fails, the phone will in-
is stored and
Send error reports
TRACE LOG SETTINGS ON PAGE 33
Position precision
You can set the device to show precision of the coor-
dinate calculation in protocol messages.
Precision of coordinates will be shown in meters until
precision exceeds 254 meters. This setting has an ef-
fect on almost all protocol messages, which contain
position information, excluding emergency messages.
Click the arrow and highlight the desired option (7).
.
.
TELEMATICS: TELEMATIC SETTINGS 31
Advertisement
Table of Contents
