Table of Contents
Advertisement
CONFIGURING SETTINGS FOR THE BENEFON TRACK PRO
Connecting the phone to the
Benefon Configurator software
1. The BW cable may contain one or two square-end
adapters. Plug the data adapter (1) into a serial
port. Serial ports are located at the back panel of
your computer.
2. Plug the flat end of the BW cable (2) in the system
connector, located at the bottom of the phone.
Make sure the release button (3) is facing up.
3. Open the
Benefon
Configurator.
1
3
2
B: THE BENEFON CONFIGURATOR SOFTWARE AND LOCAL CONFIGURATION 9
4. Choose the correct serial port from the toolbar:
Click the pop-up menu and highlight the desired
port.
Or, choose
from the
Settings
Default communication port
box. Click
Ok
to exit the menu.
T
HE MAIN IDEA IS THAT THE PORT SELECTED IN SOFTWARE
,
MATCHES WITH THE PORT
5. Double-click the main node
ble-click the phone icon. Or, choose
the
menu. Or, click the button
Mobile
cated on the toolbar.
6. The software establishes a connection to the
phone and renames
the type and the model of the phone, e.g.
Pro.
menu. Select the
Edit
by clicking the check
THE DATA ADAPTER IS PLUGGED IN
My
Benefon. Or, dou-
Connect
Connect
My Benefon
node according to
.
from
lo-
Track
Advertisement
Table of Contents
