Head Restraints - Removing And Installing; Memory Function Of The Electrically Adjustable Seat - Skoda Octavia Owner's Manual

Front restraint
›
Press the locking button » Fig. 66
A
sired direction.
Rear restraint
›
Grasp the restraint and move upwards in the direction of
›
To move the restraint down, press the securing button
arrow and hold while at the same time pressing the restraint in the direc-
2
tion of arrow .
3
WARNING
The head restraints must be correctly adjusted in order to offer effective
■
protection for the occupants in the event of an accident.
If the rear seats are occupied, the respective rear head restraint must not
■
be in the lower position.
Note
The middle rear head restraint is only adjustable in two positions.
■
For the sports seats, the head restraints are integrated into the front seat
■
backrests. This headrest can not be adjusted in height.

Head restraints - Removing and installing

Fig. 68 Removing and installing rear head restraints

Read and observe on page 85 first.
Only the real head restraints may be removed or installed.
›
Pull the head restraint out of the seat backrest as far as the stop.
and hold and move support in the de-
» Fig. 67.
1
in the direction of
B
›
Press the locking button in the direction of arrow
A
the same time using a flat screwdriver with a max. width of 5 mm to press
the securing button in opening
›
Remove the restraint in the direction of arrow
›
To re-insert the head restraint, push it far enough down in the direction of
arrow into the seat backrest until the locking button clicks into place.
4
WARNING
Never drive with the head restraints removed - risk of injury.
Note
For the sports seats, the head restraints are integrated into the front seat
backrests. These headrests can not be removed.

Memory Function of the electrically adjustable seat


Read and observe on page 85 first.
The memory function for the driver's seat provides the option to store the po-
sitions of the driver's seat and the external mirrors. Each of the three memory
buttons » Fig. 69 can be assigned a set position.
B
Storing seat and exterior mirror settings for driving forward
›
Switch on the ignition.
›
Adjust the seat to the desired position.
›
Adjust both of the exterior mirrors
›
Press the button » Fig.
SET A
›
Within 10 seconds after pressing the
button .
B
An acknowledgment sound confirms the storage.
» Fig. 68
1
in the direction of arrow .
B 2
.
3
Fig. 69
Memory buttons and SET button
» page 83.
69.
button, press the desired memory
SET
Seats and head restraints
, while at

87