Skoda Octavia Owner's Manual page 214

Fig. 196 Attach lifting jack

Read and observe on page 209 first.
Position the lifting jack below the jacking point closest to the faulty
wheel » Fig. 195.
The mounting points are located on the metal bar of the lower sill on the un-
derside of your vehicle. The positions of these are embossed by means of
markings on the side surface of the lower sill
›
Insert the crank into the mount on the car jack
7
›
Support the base plate of the jack with its full area resting on level ground
and ensure that the jack is located in a vertical position at the jacking
point » Fig. 196 - .
›
Position the lifting jack below the jacking point with the crank and move it up
until its claw encloses the web
›
Continue turning up the jack until the wheel is just about lifted off the
ground.
WARNING
Only raise the vehicle at the attachment points.
■
Choose a flat and firm surface for jacking the vehicle.
■
212
Do-it-yourself
» Fig. 195.
» page 208.
6
» Fig. 196 - .
Raising the vehicle - Version 2
Fig. 198 Attach lifting jack

Read and observe on page 209 first.
Position the car jack at the jacking point closest to the flat tyre .
The mounting points are located on the metal bar of the lower sill in the recess
in the bottom area of the plastic lower
these are embossed by means of marks
beam.
›
Insert the crank into the mount on the car jack
7
›
Support the base plate of the jack with its full area resting on level ground
and ensure that the jack is located in a vertical position at the jacking
point » Fig. 198 - .
›
Position the lifting jack below the jacking point with the crank and move it up
until its claw encloses the web
›
Continue turning up the jack until the wheel is just about lifted off the
ground.
Fig. 197
Jacking points for positioning
lifting jack
pillar trim » Fig. 197. The positions of
B
in the side surface of the lower
A
» page 208.
6
» Fig. 198 - .
