Climatronic (Automatic Air Conditioning) - Skoda Octavia Owner's Manual

Functions of the individual controls
Setting temperature
A
›
Lower temperature

›
Increase temperature

Set the blower stage (stage 0: Blowers off, Level 6: the highest blower
B
speed)
Set the direction of the air outlet
C
›
 Air flow to the windows
›
 Air flow to the upper body
›
 Air flow into the footwell and onto the body (in the footwell air is
warmer than onto the body)
›
 Air flow in the footwell
›
 Airflow over the windows and into the footwell
Depending on equipment fitted:
D
›
 Switching on/off aux. heating (standard heating) on/off
›
 Switching the windscreen heater on/off
Operating the seat heater on the front left seat

Switch the cooling system on/off

Switching the rear window heater on/off

Switch recirculation on/off » page 116

Operate the seat heater on the front right seat

Note
The warning light in the button  lights after activation, even if not all of
■
the conditions for the function of the cooling system have been met. The light-
ing up of the indicator light in the button signals the operational readiness of
the cooling system.
During operation of the air conditioning, an increase in engine idle speed may
■
occur under certain circumstances in order to ensure sufficient heating com-
fort.
118
Using the system
» Fig. 122
» page 115
» page 121
» page 79
» page 89
» page 79
» page 89

Climatronic (automatic air conditioning)

Fig. 123 Controls the Climatronic

Read and observe and
The Climatronic in automatic mode ensures the best-possible setting of the
temperature of the outflowing air, the blower stage and air distribution.
The system also takes sunlight into account, which eliminates the need to al-
ter the settings manually afterwards.
Individual functions can be set off or on by turning the knob or pressing the
respective button. When the feature is turned on, a warning light illuminates
within or below the button.
Functions of the individual controls
Adjust the temperature for the left side or for both sides
A
›
Lower temperature

›
Increase temperature

Interior temperature sensor
B
Set the temperature (turn to the left: Reduce fan speed, turn to the right:
C
Increase blower speed)
Display the temperature setting for the right side
D
›
Lower temperature

›
Increase temperature

Display the temperature setting for the left side
E
Display the temperature setting for the right side
F
Depending on equipment fitted:
G
›
 Switching on/off aux. heating (standard heating) on/off
›
 Switching Climatronic system off
on page 115 first.
» Fig. 123
» page 121
»
