Skoda Octavia Owner's Manual page 51

CAUTION
Pull out the ignition key if coming in contact with the display (e.g. when clean-
ing) to prevent any possible damage. On vehicles with the KESSY system,
switch off the ignition and open the driver's door.
Main menu

Read and observe and
Operating the MAXI DOT display
Main menu items (depending on vehicle equipment)
Driving data » page 45
■
Assist systems » page 160, » page 152
■
■ Navigation » operating instructions for Infotainment, chapter Navigation
system (NAV button)
Audio » operating instructions for Infotainment, chapter Audio (MEDIA but-
■
ton)
Telephone » operating instructions for Infotainment, chapter Communica-
■
tion (PHONE button)
■ Vehicle » page 45, Auto-check control
Lap timer » page 49
■
Menu item wizard
In the menu item Assist systems the Front Assist and the Lane Assist can be
confirmed and activated or deactivated .
The menu item Assist systems in the main menu can also be opened by press-
ing the button on the control lever
A
Fig. 30
Operating lever: Button to open
the menu item wizard
on page 48 first.
» page 44.
» Fig. 30.
Note
If the MAXI DOT display shows warning messages, these messages must be
confirmed in order to access the main menu
system .
Lap timer (Stop watch)

Read and observe and
The Laptimer function offers the possibility of calculating the lap time, for ex-
ample when driving on a race course. The measured time is shown in the dis-
play.
Operation of the lap timer function
The calculated times are displayed in minutes, seconds and deciseconds.
Activate Laptimer function
›
From the main menu of the display select the menu item Lap timer.
The following functions are available.
■ Start - start the timing manually or continue the interrupted measurement
Since start - Start the timer automatically upon start-up
■
Statistics - Evaluate and reset the measured times
■
Time measurement
Manually start the measurement
›
Select the menu item Lap timer - Start.
Start the measurement automatically
›
Select the menu item Lap timer - Since start. Timing will begin automatically
when starting up.
Start timing of next round
›
Select the menu item New lap during timing.
During timing, information about the fastest and the last lap time are also
shown in the display.
Measure split time
›
During the timing, select the menu item Split time. The split time data is dis-
played for about 5 seconds in the display.
The split time can be measured repeatedly during a round.
Stop measurement
›
During the timing, press the menu item Stop.
» page 44, Using the information
on page 48 first.
» page 44, Using the information system.
Information system

49