Skoda Octavia Owner's Manual page 86

Automatically folding in and folding back both exterior mirrors
The exterior mirrors are automatically collapsed after locking the vehicle in the
park position.
The exterior mirrors are folded out automatically after unlocking the vehicle in
the driving position.
Folding in both mirrors can be activated or deactivated in the Infotain-
ment » Operating instructions for Infotainment, chapter Vehicle settings (CAR
button).
Mirror with automatic dimming
The exterior mirror blackout is controlled together with the automatic dimming
interior mirror » page 83.
Fold in passenger's mirror
The passenger-side mirror can tilt down to improve the view to the curb when
reversing.
The mirror will be folded if the following conditions are met.
The vehicle is equipped with the memory function for the driver's

seat » page 87.
The function is deactivated in Infotainment

fotainment, chapter Vehicle settings (CAR button).
The knob for the mirror control is in the position for the passenger mirror

adjustment.
The reverse gear is engaged.

Memory function for mirrors
On vehicles fitted with the memory function for the driver seat
the memory function for the remote control key
save each position of the exterior mirror when saving the driver seat position.
WARNING
Do not touch the exterior mirror surfaces, if the exterior mirror heating is
switched on - hazard of burning.
CAUTION
The exterior mirrors with fold-in function  never mechanically fold by hand
■
- there is a risk of damaging the electric mirror actuator!
When the mirror is swung by external influences (due to impact during ma-
■
noeuvring, for example), then first fold-in the mirror by turning the knob and
wait for a loud clapping noise.
84
Using the system
» Operating instructions for In-
» page 87 or
» page 88 it is possible to
Note
The mirror heater only operates when the engine is running and up to an
■
outside temperature of +35 ℃.
If the electrical mirror setting fails at any time, the mirrors can be adjusted by
■
hand by pressing on the edge of the mirror surface.