Installing the Honeywell IP Utility and Web
Client
About the Honeywell IP Utility and Web Client
About the Honeywell IP Utility
Document 800-09311V3 Rev A
07/2013
This chapter describes how to:
•
Install and log onto the IP Utility
•
Connect to a device and configure network settings using the IP Utility
•
Launch the web-client software
•
Uninstall the IP Utility, Bonjour, or ActiveX software
The Honeywell IP Utility is a software application that is installed from a DVD or
downloaded from the Honeywell Systems Group web site
(www.honeywellsystems.com/support/download-center/index.html). It is installed on a
local workstation and primarily used by Administrators to configure the Performance IP
cameras residing on an IP network.
The IP Utility enables users to:
•
Discover device(s) on a network
•
Configure the IP network settings, name device(s), upgrade firmware, change
passwords.
•
Open individual web-client applications for each discovered device.
Updating the Honeywell IP Utility
Honeywell recommends that you regularly check the Honeywell websites for the latest
available software updates.
Go to
www.honeywellsystems.com/support/downloadcenter/index.html
instructions on the page to logon, find your camera, and then download the software
updates.
3
and follow the
31