Camera Setup; Figure 4-11 Camera Setup - Honeywell HD54IP User Manual

Camera Setup

Document 800-09311V3 Rev A
07/2013
Performance Series Rugged Day/Night H.264 IP Dome Camera User Guide
2. In the Statistics area, select the Received check box.
Deselecting the check box disables the refresh rate.
Note The Received check box is disabled by default. When you log out, this check
box reverts to the disabled state.
The Camera Setup view provides access to the settings used to configure the camera for
both primary and secondary streams. The following section explains Auto Exposure and
White Balance setup.
Note You must click Apply after you make changes to any settings to save those
changes. Settings are not saved unless you click Apply.
Figure 4-11 Camera Setup
57