Interface
Administrator
Honeywell IP
•
View the list of available network devices
Utility
and connect to the devices.
•
Configure the IP network settings.
•
Upgrade firmware.
•
Change the password to access the IP
Utility application.
•
Change the access passwords to the
web client application.
Web Client
•
View video and network settings.
•
Configure compression settings.
•
Configure camera setup.
•
Configure video analytics.
Step 1: Confirm Your System Requirements
Document 800-09311V3 Rev A
07/2013
Performance Series Rugged Day/Night H.264 IP Dome Camera User Guide
Table 3-1
User Profiles for Honeywell IP Utility and the Web-Client
Note
Windows administrator privileges are required to install the Honeywell IP
Utility and associated software.
Note
Contact the network administrator if there are any questions regarding the
local area network (LAN) or any other network-related issues.
Install the Honeywell IP Utility on a work station with the minimum requirements (outlined
in
Table
3-2). After the IP Utility is installed, the same computer workstation can be used to
access the web client.
Guest
•
View the list of devices available on the
network.
•
View system settings including device
name, IP address, and MAC address.
•
Guest users are limited to the Live View
tab where they can view video
33