Video Analytics - Honeywell HD4DIP Reference Manual

Video Analytics

Document 800-00249 Rev C
08/08
Table 4-5 White Balance Settings (cont'd)
Option
Fluorescent
MWB (Manual Mode)
Indoor
AWC Manual (Auto White
Balance Control Mode)
Outdoor
The HD4DIP(X) camera can be configured to detect three types of sabotage detection via
the Video Analytics view (see
and tampering with the camera field of view. Alarm messages appear above the video
display when camera sabotage is detected (see
The user must note that when the following conditions are applicable, the tamper detection
features must be manually disabled to avoid raising false alarms:
• during the configuration of the video display
• while text is overlaid on the video
• if the video display becomes too dark
HD4DIP Network Camera Reference Guide
Description
For office environments with fluorescent or tungsten
lighting. Provides the lowest dynamic range of all presets
(4200°K).
Manual white balance mode. Set the Red and Blue gains
from 0–255.
General indoor scenes preset (3200°K).
Operates AWC mode manually. When the AWC operation
starts, click Lock to set the present scene's white balance.
Preset for outside environments and high-contrast scenes
where the camera is focused on the darker areas (6300°K).
Figure 4-10): blinding the camera, blurring the video display,
Figure 4-11).
55