Installing the Honeywell IP Utility and Web Client
Step 3: Log Onto the IP Utility and Discover Network Devices
36
Enable Microsoft .NET Framework 3.5 on Your Workstation
Although Microsoft .NET Framework 3.5 is pre-installed on Windows 7, you might have to
confirm that it is also enabled on your workstation.
Go to Start Control Panel Programs Programs and Features.
1.
2.
Click the check box beside Microsoft .NET Framework 3.5 to enable it.
3.
Click OK to save the new setting.
1.
Double-click the Honeywell IP Utility icon
-OR-
Click Start Programs Honeywell Video Systems IP Utility Honeywell IP
Utility.
The Honeywell IP Utility Log On window opens.
Figure 3-1
Honeywell IP Utility Log On Window
2.
Select Administrator or Guest from the User Name drop-down list.
3.
Enter the case-sensitive password in the Password field.
The default administrator password is 1234.
•
The default guest password is guest.
•
Note
During the installation set up, you must log on as an Administrator to access
all the features.
4.
Click the arrow button
The Honeywell IP Utility program searches for devices on the network and opens to
the Honeywell IP Utility user interface.
on your desktop.
.