Navigating The Web Client User Interface; Figure 4-3 Web Client Window Layout: Administrator Log On; Table 4-2 Tabs/Views In The Web Client Application - Honeywell HD54IP User Manual

Navigating the Web Client User Interface

The URL (above the tabs) corresponds to
the IP Address as configured in the IP Utility.
If logged on as a Guest, only the Live
View tab is available. Administrators
can access all tabs.
The image from your
HD55IP/HD55IPX
camera displays on
every tab.
Document 800-09311V3 Rev A
07/2013
Performance Series Rugged Day/Night H.264 IP Dome Camera User Guide
Figure 4-3 Web Client Window Layout: Administrator Log On
The web client application user interface consists of multiple user-friendly views organized
by function. Access to the views is user-controlled.
Table 4-2 Tabs/Views in the Web Client Application
Tab Enables you to...
Live View View video and take SnapShots.
Device Settings View the network settings and firmware details of the camera.
Restore to factory defaults and reboot a camera.
Compression Configure the compression.
Settings
Set the maximum bit rate and/or target bit rate that the camera will
provide across the network based on priority mode settings. This
value is the threshold that you do not want the bit rate to exceed.
View received bit rate and frame rate statistics of the current image
in real time.
Camera Setup Configure auto exposure and white balance for the camera.
Video Analytics Configure the camera sabotage detection settings and view video
display.
IO & Audio Not supported.
Click Logout (on the right hand side, above the tabs)
to exit the program.Confirm the user type logged in.
Click the tabs
to access the
available
configurations
and settings.
SnapShot
Each tab has a section for configuration
and/or navigation controls.
49