Ae Control ( Menu => Camera => Ae Control); Blc/Bmb Setup ( Menu Camera Blc/Bmb Setup) - Honeywell ScanDome iii HSDC-251N/P Operation & Programming Manual

MODE
CONT
Use the ATW mode for normal use.
CONT modes are controllable only in AWC(ONE PUSH) and MWB Mode
Push the Joystick to the right or left to change.
3.4.3 AE CONTROL ( MENU => CAMERA => AE CONTROL)
Depending on your dome camera, you will see either the following screen or the next.
MODE
SLOW SHUTTER
IRIS
GAIN
SHUTTER
NOTE : Values in ( ) are for PAL Camera.
3.4.4 BLC/BMB SETUP ( MENU è CAMERA èBLC/BMB SETUP)
Objects in front of bright backgrounds will be clearer with BLC ON/AUTO/BMB.
*) BMB[Black Mask BLC] : It is another function of BLC. It mask the excessive light to dark level
and make brighter to see object around the excessive light.
BLC
BMB LEVEL
(As BMB level lower, BMB masked range enlarge more and more)
ATW / INDOOR / OUTDOOR / MWB / AWC(ONE PUSH) / AWC(AUTO)
AUTO / 0~99 (in MWB) / LOCK (in AWC(ONE PUSH))
AE SETUP
MODE
SLOW SHUTTER : X128
IRIS
GAIN
BRIGHT
SHUTTER
SAVE AND EXIT
: AUTO / SHUTTER FIX / IRIS FIX / GAIN FIX / MANUAL
: OFF/X2/X4/X8/X16/X32/X64/X128
: CLOSE / F28/ F22 / F19 / F16 / F14 / F11 / F9.6 / F8.0 / F6.8 /
F5.6 / F4.8 / F4.0 / F3.4 / F2.8 / F2.4 / F2.0
: 8 DB / 10 DB / ...... / 38 DB
: 1/60(1/50), 1/100(1/120),. .. ,1/1000, 1/2000, 1/4000, 1/10000.
BLC/BMB SETUP
BLC
BLOCK SET
PREVIEW
BMB LEVEL
EXIT
: OFF, ON, AUTO, BMB
: 1 ~ 7
: AUTO
: F2.4
: 8 DB
: 8
: 1/60
: OFF
: 07
30