Servicing; Outdoor Unit; Removing Air Intake Grille; Removing Front Service Panel - Hitachi FSG Series Service Manual

2 SERVICING

2.1

OUTDOOR UNIT

$
WARNING: TURN OFF all power source switches
2.1.1

REMOVING AIR INTAKE GRILLE

1. Remove two (2) screws for the air intake grille at the rear
side of the unit.
2. Remove the air intake grille by pulling and unhooking four
(4) hooks at both sides.
2.1.2

REMOVING FRONT SERVICE PANEL

1. Remove five (5) screws. Slightly lift the panels upwards
and remove them.
Note:
When removing screws for front service panel, remove the
screw at the lower part of panel firstly
2.1.3

REMOVING FAN GUARD NETS

1. Remove four (4) screws and remove the fan guard net
Hook
Screw
Screw
Screw
2
SERVICING
1
Hook
Fan Guard Net