Operation Procedure For Running Pattern; Operation Procedure For Operation Pattern - Hitachi FSG Series Service Manual

4.5.2.

OPERATION PROCEDURE FOR RUNNING PATTERN

1 Supply Power to the Unit
2 Setting the present Day:
Depress the "SET/MONITOR" switch for more than 3 (three) seconds.
The "SET" indication blinks. This indicates the "CLOCK" mode.
Set the "|" mark with present day by depressing the "PRESENT
DAY" switch.
3 Setting the present Time:
Set the "Present Time and ON/OFF Setting Time" indication with the
present time by depressing the "HOUR" and "MINUTE" switches on
the "ON/OFF TIME" switch.
4 Fixing the Present Day and Present Time:
The present day and the present time are fixed by depressing the
"SET/MONITOR" switch. The "CLOCK" mode is changed to the
"MONITOR" mode and the "SET" indication is turned OFF.
5 Setting the Operation Mode:
Setting
By depressing the "SET/MONITOR" switch, operation mode is
changed to the "SETTING" mode and the "SET" indication is turned
ON
6 Setting Running Day of a week:
Set the "|" mark at the required running day of a week by depressing
the "SELECT" switch.
Depress the "SET/RESET" switch, the "{" mark will be turned ON at
the required running day.
When the unit is not required to be started, "{" mark should be turned
OFF
7 Setting or canceling ON/OFF Time:
The "ON/OFF TIME" is adjustable by depressing the "HOUR" and
"MINUTE" switches of the "ON/OFF TIME" switch after depressing the
"ON TIME" or "OFF TIME" switch of the "MONITOR" switch.
In the case that "ON TIME" is set or cancelled, depress the "SET" or
"CANCEL" switch after adjusting the "ON TIME".
In the case that "OFF TIME" is set or cancelled, depress the "SET" or
"CANCEL" switch after adjusting the "OFF TIME".
By the above procedure, three patterns in a day as a maximum can
be set.
4.5.3.

OPERATION PROCEDURE FOR OPERATION PATTERN

1 Setting Control Mode:
By depressing the "SET/MONITOR" switch, the "SET" indication is
turned OFF and the "MONITOR" mode appears
2 Setting Day of a week for Monitoring.
By depressing the "SELECT" switch of the "DAY OF WEEK" switch, the
Monitoring
"|" mark is set at the required day of a week.
3 Monitoring ON/OFF Time:
In the case that the "ON TIME" is monitored, depress the "ON TIME"
switch of the "MONITOR switch.
In the case that the "OFF TIME" is monitored, depress the "OFF TIME"
switch of the "MONITOR switch.
OPTIONAL FUNCTION
4
25