Removing Fan Motor - Hitachi FSG Series Service Manual

2
SERVICING
42
$
WARNING: TURN OFF all power source switches
3. Pull out the deflector including the bearing after removing
four (4) fixing screws at the right and left.
2.8.4

REMOVING FAN MOTOR

1. Open the intake air grille according to the item, 2.8.1,
"Removing Air Filter".
2. Remove the stay at the air inlet.
3. Disconnect the connector for the indoor fan motor.
4. Hook the electrical box on the lower frame after removing
the screws fixing the electrical box.
NOTE:
During this work, support the electrical box by hands not to
drop it.
Bearing
Intake Air Panel
Stay
Wiring Cover
Electrical
Box
Fixing Screw
Air Deflection
Air Deflection
Fixing Screw
Lower
Frame