Installing Sdk To Pc; Application Development - Casio IT-3100 Series Quick Start Manual

3. Installing SDK to PC

3.1 Application Development

This chapter explains about what you need to set up for the development environment before
starting your application development.
1. Installing Development Platform
Install Microsoft's development platform which supports Visual Studio 2005. For detail, refer to
Chapter 2.3 "Software Required".
2. Installing CASIO SDK to PC
Install Casio's SDK and various libraries if necessary. For installation method, refer to Chapter
3.2 "Installing CASIO SDK Files".
3. Connecting IT-3100 to PC (via ActiveSync/Windows Mobile Device Center)
Connect the IT-3100 to PC via Microsoft's ActiveSync (for Windows XP or any other OS before
Windows XP) or via Windows Mobile Device Center (for Windows Vista or later). For
connection method, refer to Chapter 5 "Connecting the IT-3100 to PC".
4. Setting Up the Development Environment
Copy all necessary CASIO libraries to the IT-3100.
For detail, refer to Chapter 6 "Setting Up the Development Environment".
5. Installing the Device Emulator
Install the Device Emulator for the IT-3100. For installation method, refer to Chapter 7 "Device
Emulator". If not necessary to install, go to 6 "Application Development" below.
6. Application Development
Now, the application development environment is set up and your development with the
development platform can be started. After application is developed, transfer it to the Device
Emulator or an actual terminal of the IT-3100 via ActiveSync or Windows Mobile Device Center
for check on the operability. For application development method and transferring your
application, refer to Chapter 8 "eMbedded Visual C++" and Chapter 9 "Visual Studio".
16