Installing Irxpress - Casio IT-3100 Series Quick Start Manual

5.1 Installing IRXpress

This chapter describes about the installation procedure for IRXpress ("IrDA driver") in the PC.
In order to establish connection of IT-3100 with PC, the IRXpress driver must be pre-installed in
the PC.
Install either USB driver or RS-232C driver in the PC depending on the cable you use to establish
connection via the cradle. Method of installing USB and RS-232C drivers is dependant on the OS
type of your PC.
Choose one of the drivers you wish to install in your PC and download the appropriate file
depending on the OS type from the CASIO web site.
Table 5.1
Driver
USB driver
RS-232C driver
Notes:
1. Download both files, SetupUSBIrDA.exe and IRXpressUSBIrDA.exe, in the same folder
and then initiate SetupUSBIrDA.exe.
2. Download both files, SetupSerialIrDA.exe and IRXpressSerialIrDA.exe, in the same folder
and then initiate SetupSerialIrDA.exe.
3. Be sure to close all applications if running before installing the driver. The installation of the
driver prompts you to start up your PC.
Windows Server 2003
Windows XP Professional
Windows 2000 Server
Windows 2000 Professional
IRXpressUSBIrDA.exe
IRXpressSerialIrDA.exe
24
Windows Vista Business
Windows Vista Ultimate
SetupUSBIrDA.exe
IRXpressUSBIrDA.exe
SetupSerialIrDA.exe
IRXpressSerialIrDA.exe
(see note 1)
(see note 2)