8. eMbedded Visual C++
8.1 Building a Simple eVC++ 4.0 Test Program
1. On the PC, initiate eVC++ 4.0.
2. Navigate to File → New in the File menu.
Figure 8.1
3. Highlight WCE Application in Projects tab. See Figure 8.1.
4. In Location: field, navigate to the folder where you want to create the new project.
5. In Project name: field, type in the name of the project.
6. In CPUs: pull-down menu, check Win32 (WCE ARMV4I).
7. In the next dialog, leave A typical "Hello World!" application checked. Click Finish and
then click OK button.
8. Below the Toolbar you will see a line of pull-down menu lists. Look for the one that indicates
the target devices available to you and select IT-3100 in the list. The right most pull-down
menu list will change to IT-3100 Device.
Figure 8.2
9. Initiate an ActiveSync connection using one of the methods described in this guide.
10. Choose Rebuild All from Build menu (or use the appropriate icon on the Toolbar).
68