Casio IT-3100 Series Quick Start Manual page 66

When using Visual Studio 2008 or Visual Studio 2005
Navigate to Debug menu → Start Debugging to start up the debugger.
1.
Figure 7.19
2. Similar to ordinary debugging operations with an actual IT-3100, the Device Emulator
allows break point setting (circled in red in Figure 7.20) in the source code and step-by-step
debugging.
Figure 7.20
Note:
If the debugging operation does not stop at the break point, install Microsoft .NET Compact
Framework 2.0 SP2 in your PC.
66