Connecting Via Activesync - Casio IT-3100 Series Quick Start Manual

7.3.3 Connecting via ActiveSync

If debugging with the Device Emulator is carried out in eMbedded Visual C++ 4.0 or Visual
Studio 2008 or Visual Studio 2005, or transmission/reception of a file with the Device Emulator
is carried out, ActiveSync must be used.
Setting ActiveSync
1. Start up ActiveSync and then navigate to File → Connection Settings ....
Figure 7.13
2. In Connection Settings screen, check in the Allow connections to one of the following
box and choose DMA in the pull-down menu. See Figure 7.14.
Figure 7.14
62