Casio IT-3100 Series Quick Start Manual page 31

5. If all detail is okay in Figure 5.12, click Next > button. The screen below appears to indicate the
completion of installing the driver.
Figure 5.13
6. Clicking Finish button in Figure 5.13 starts up the PC again.
7. After starting up the PC, turn on the power on the cradle. The device recognition is automatically
carried out.
The subsequent screens in this page and the next page appear only once when the cradle is
connected to the USB port on the PC for the first time after installing the driver.
1. After the PC has started up again, turn on the power on the cradle. The device recognition screen
appears.
Figure 5.14
31