Chapter 5: Lens Control Motor; Lens Control Motor Overview - RED 3-Axis Lens Control System Operation Manual

R E D 3 - A X I S S Y S T E M O P E R AT I O N G U I D E
05
LENS CONTROL
MOTOR

Lens ControL Motor oVerVIeW

The Lens Control Motor delivers precision control and flexibility in a slim, lightweight design. The
Lens Control Motor features dual-sided dovetail rails, a tool-free mounting clamp, and a rotating 7-pin LEMO
connector for space-saving low profile configuration. It is also engineered with adjustable torque settings,
mounting options for 15mm or 19mm support rods, and a magnetic-locking gear system to accommodate a
wide variety of lenses.
The RED Lens Control Motor is also compatible with third-party motor drivers using the appropriate RED mo-
tor cable with the proper resistance identification. For more information, visit the
com/store or contact your Bomb Squad representative.
WArnInG: ALWAYS use the RED motor cable with the appropriate internal identification resistor when using RED
Lens Control Motors with third-party motor drivers. Any damage caused to motors or motor drivers resulting
from the use of third-party cables will not be covered under warranty.
note: For more information on compatibility, go to
This section provides information on the following Lens Control Motor components:
 RED Lens Control Motor
 RED Lens Control Motor Mounting Bracket
 19mm-to-15mm Rod Reducer Kit
 Lens Control Motor Gear M 0.8
COPYRIGHT © 2014 RED.COM, INC
"Compatible Motor Drivers" on page
Lens Control Motor with Lens Con-
trol Motor Mounting Bracket
RED Store at http://www.red.
54.
955-0044, REV-D | 41