Table of Contents
Advertisement
Cloning allows you to quickly and easily transfer the pro-
grammed contents from one transceiver to another trans-
ceiver ; or, data from a PC to a transceiver using the optional
CS-T2
CLONING SOFTWARE .
O Transceiver-to-transceiver
AT
POWER ON
cloning
* Connect the OPC-474
CLONING CABLE
with adapter plugs
to the [SP] jack of the master and slave transceivers .
" The master transceiver is used to send data to the slave trans-
ceiver .
OO
While pushing [H/L] + [A], turn power on to enter cloning
mode (master transceiver only-power on only for slave
transceiver) .
" "CLonE" appears and the transceivers
enter the clone standby condition.
Os Push [PTT] on the master trans-
ceiver.
" "CLoUT" appears in the master trans-
ceiver's display and the
S/RF
indica-
tor shows that data is being
transferred to the slave transceiver.
" "CL In" appears automatically in the
slave transceiver's display and the
S/RF
indicator shows that data is
being received from the master trans-
ceiver.
'_
L
1 11_
1
ll_I 1_
680©000#0
10
-
1
880©000#0
® When cloning is finished, turn power off, then on again to
exit cloning mode .
O Cloning using a PC
Data can be cloned to and from a PC (IBM compatible) using
the optional CS-T2
CLONING SOFTWARE
and the optional OPC-
478
CLONING CABLE.
The software is necessary to access the
IC-T2H's ANI mode . Consult the CS-T2
CLONING SOFTWARE
HELP message for details.
O Cloning error
NOTE : DO NOT push the [PTT] on the slave transceiver
during cloning . This will cause a cloning error.
When the display at right appears, a
cloning error has occurred .
In such a case, both transceivers au
tomatically return to clone standby condition and cloning must
be repeated .
1
1111
i i
1
r l,
Advertisement
Table of Contents
