Table of Contents
Advertisement
Memory (call) channel contents can be moved to VFO or to
another memory.
O Memory/call > VFO
O Select the memory (call) channel to be transferred :
~+ Push [AV] ([* (CALL)]) to select memory (call) mode .
~+ Push [A]/[V] to select the memory (call) channel .
OO
Push [s M] for 1 sec . t o transfer the VFO contents
selected memory.
" VFO mode is selected .
to the
O Memory/call > memory/call
O Select the memory (call) channel to be transferred :
kl+
Push [AV] ([*(CALL)]) to select memory (call) mode .
,-* Push [A]/[V] to select the memory (call) channel .
OO
Push [a M] momentarily.
" "VF" appears and flashes with "m" .
O Push [ " ]/[V] to select the target memory.
® Push [s M] for 1 sec .
" VFO mode is selected and the contents are transferred to the tar-
get memory.
MEMORY/CALL PROGRAMMING
O Clearing a memory
O Push [e M] to enter memory transfer mode .
" "m"
and a memory channel number flash .
OO
Push ["]/[V] to select the memory channel to be cleared .
" Memory channels PA, Pb and CH1 cannot be cleared .
O Push [e M] momentarily, then within
1 sec . push it again for 1 sec .
*The contents of the selected
memory are cleared .
® Push [
4 ]
to return to regular operation .
Advertisement
Table of Contents
