Table of Contents
Advertisement
" General
The transceiver has 40 memory channels (plus 1 pair of scan
edge channels and 1 call channel) for storage of often-used
frequencies . In addition, the USA version has 10 marine
weather channels (however, these are not programmable).
O Memory/call channel contents
The following information can be programmed into mem-
ory/call channels :
" Operating frequency
" Duplex direction (DUP or
(pgs . 15, 16)
" Subaudible tone encoder
26)
" Subaudible tone and tone squelch frequencies (pgs . 15, 26)
" Skip information` (p . 25)
'Except for scan edge memory channels .
-DUP) with an offset frequency
or tone squelch on/off (pgs . 15,
MEMORY/CALL PROGRAMMING
" Programming a memory
channel
10 Push [a V] to select VFO mode, if
necessary.
11_11 11 1
1 11_1,1_1 1
20 Push 6 digit keys to enter the desired frequency.
O Push [DUP], [c T], etc. to set other
information as desired.
® Push [e M], then select a memory
channel number with [A]/[V] .
I
s I 10
n
1
yr_y
111.11
1
I
O Push [e M] for 1 sec. to program
the information into the channel
and return to VFO.
TSQL
11I1 1111
il
r
1
1 1,111_1
T SQL
,
11_11 1111
ii 1 1 _1,1_11_1
Advertisement
Table of Contents
