Table of Contents
Advertisement
BATTERY PACKS
" Installing batteries in the
battery case
When using a battery case attached to the transceiver, install
8 AA(R6) size Ni-Cd or alkaline batteries as illustrated below.
O Remove the bat-
tery case from the
transceiver.
O Install 8 x R6(AA)
size Ni-Cd or alka-
line batteries.
" Be sure to observe
the correct polarity.
" NEVER connect DC power to the transceiver when in-
stalling dry cell or alkaline batteries. Such a connection will
damage the transceiver.
" Be careful of battery overcharging . When operating via ex-
ternal DC power, installed batteries are simultaneously
charged.
" Keep battery contacts clean . It's a good idea to clean bat-
tery terminals once a week .
" Powei
Rotate [PWRA
to turn power C
O Toggling
indication
Channel indica
mode only pre
displayed and i
[ 4 ], [H/L] and
To toggle betty
While pushing
Frequency indics
Advertisement
Table of Contents
