5056-XXX
Map 8 - False 40 Tray (x) Size Sensor Error message
Step
Questions/actions
1
On the high-capacity feeder, are the paper size
adjusting screws present on the upper portion of the
side fence and fully screwed into the adjusting
bracket?
2
Observe the LEDs 1 and 2 on the HCF control board
while unscrewing the paper size adjusting
thumbscrews. Do the LEDs light when the screws are
loosened all the way?
Map 9 - False 41 Open Bin 1 Exit Tray message
Step
Questions/actions
1
Is the exit tray switch actuator broken or damaged?
2
Disconnect CN4 from the CK2 daughter board. When
activating the paper exit tray switch, is there continuity
between pins 1 and 2?
2-46
Service Manual
Yes
No
Go to step 2.
Replace the
missing
thumbscrew or
screw them in all
the way.
Replace the HCF
Replace the
control board.
affected sensor.
Paper size
sensor 1 for
11 inch or paper
size sensor 2 for
A4.
Yes
No
Replace the
Go to step 2.
paper exit tray.
Replace the
Replace the
printer controller
paper exit tray
board.
switch.