Lexmark 5056-xxx Parts Catalog
Lexmark 5056-xxx Parts Catalog

Lexmark 5056-xxx Parts Catalog

Lexmark feeder service manual

Advertisement

Quick Links

The following paragraph does not apply to any country where such provisions are inconsistent with local law:
LEXMARK INTERNATIONAL, INC. PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or
implied warranties in certain transactions; therefore, this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the
information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the
programs described may be made at any time.
Comments may be addressed to Lexmark International, Inc., Department D22A/032-2, 740 West New Circle Road,
Lexington, Kentucky 40550, U.S.A or e-mail at ServiceInfoAndTraining@Lexmark.com. Lexmark may use or distribute any
of the information you supply in any way it believes appropriate without incurring any obligation to you.
Lexmark, Lexmark with diamond design, and MarkNet are trademarks of Lexmark International, Inc., registered in the
United States and/or other countries.
ImageQuick, Optra Forms, and PrintCryption are trademarks of Lexmark International, Inc.
LEXFAX is a service mark of Lexmark International, Inc.
PostScript® is a registered trademark of Adobe Systems Incorporated.
PCL® is a registered trademark of the Hewlett-Packard Company.
Other trademarks are the property of their respective owners.
© 2006 Copyright Lexmark International, Inc.
All rights reserved.
UNITED STATES GOVERNMENT RIGHTS
This software and any accompanying documentation provided under this agreement are commercial computer software and
documentation developed exclusively at private expense.
Lexmark Parts Catalog
The following information is from Lexmark's Service Mnaual.
Lexmark™ C920
Lexmark and Lexmark with diamond design are
trademarks of Lexmark International, Inc., registered
in the United States and/or other countries.
5056-xxx

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 5056-xxx and is the answer not in the manual?

Questions and answers

Summary of Contents for Lexmark 5056-xxx

  • Page 1 Lexington, Kentucky 40550, U.S.A or e-mail at ServiceInfoAndTraining@Lexmark.com. Lexmark may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. Lexmark, Lexmark with diamond design, and MarkNet are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.
  • Page 2: How To Use This Parts Catalog

    NS: (Not shown) in the Asm-Index column indicates that the part is procurable, but is not pictured in the illustration. • PP: (Parts Packet) in the parts description column indicates that the part is contained in a parts packet. Description 5056-XXX Parts catalog...
  • Page 3: Assembly 1: Covers

    5056-XXX Assembly 1: Covers 1 Service Manual...
  • Page 4 40X1129 Cover, left front 1—10 40X1126 Cover, left side 1—11 40X1127 Cover, paper feed 1—12 40X1125 Cover, solenoid 1—13 40X1122 Tray assembly, exit 1—14 40X1128 Cover, rear 1—15 40X1130 Cover, adjustment 40X1516 Label, MPT 40X1262 Parts packet 5056-XXX Parts catalog...
  • Page 5: Assembly 2: Covers

    5056-XXX Assembly 2: Covers 2 Index Units Description 2 — 1 40X1026 Exit assembly, face up Service Manual...
  • Page 6: Assembly 3: Covers

    Assembly 3: Covers 3 Index Units Description 3 — 1 40X1027 Guide assembly, face-down 3 — 2 40X1064 Exit roller, face-down Parts catalog 5056-XXX...
  • Page 7 5056-XXX Assembly 4: Covers 4 Index Units Description 4 — 1 40X1242 Guide assembly, turn Service Manual...
  • Page 8 5056-XXX Assembly 5: Covers 5 Index Units Description 5 — 1 40X1135 Feeder assembly, multipurpose Parts catalog...
  • Page 9: Assembly 6: Upper Unit

    5056-XXX Assembly 6: Upper unit Service Manual...
  • Page 10 Holder, rear printhead 6—29 56P9609 Spring, printhead 6—30 40X1148 Bracket, rear upper 6—31 40X1032 Fan, upper right 6—32 40X1033 Fan, upper left 6—33 56P9621 Bracket, fan holder 56P9993 Shield, light (used on p/n 56P9594) 40X1263 Parts packet 5056-XXX Parts catalog...
  • Page 11: Assembly 7: Paper Feed

    5056-XXX Assembly 7: Paper feed 7-10 Service Manual...
  • Page 12 Cable asm, drive unit sensor 7 — 27 56P9645 Sensor, drive unit 7 — 28 40X1037 Clutch, belt up/down 7 — 29 40X1038 Frame, sub 40X1264 Parts packet (See “Parts packets” on page 7-58 for contents) 5056-XXX 7-11 Parts catalog...
  • Page 13 5056-XXX Assembly 8: Base 2 7-12 Service Manual...
  • Page 14 Pin, upper unit support 40X2776 Stop, right 40X2779 Cover, black photodeveloper 40X1208 Handle assembly, lock 56P9669 Handle, lock 40X2778 Stop, left 40X1151 Cover, electronic 40X2777 Guide, lock 56P9670 Shroud, cable 56P9672 Guide, cable 56P9671 Guide, cable 40X1265 Parts packet 5056-XXX 7-13 Parts catalog...
  • Page 15 5056-XXX Assembly 9: Base 3 7-14 Service Manual...
  • Page 16 40X1155 Frame assembly, F1 sub 9 — 21 56P9685 Frame assembly, F2 sub 9 — 22 56P9686 Rod, lock 9 — 23 56P9687 Cover, gear 9 — 24 40X1156 Stopper, clutch 56P9697 Bushing 40X1266 Parts packet 5056-XXX 7-15 Parts catalog...
  • Page 17: Assembly 10: Electrical A

    5056-XXX Assembly 10: Electrical A 7-16 Service Manual...
  • Page 18 Cord (8ft 15A straight), Japan 40X0286 Cord (6ft straight), England, France, Germany, Spain, Belgium 40X0272 Cord (8ft right angle), Argentina, Paraguay, Uruguay 40X0273 Cord (8ft straight), Italy 40X0274 Cord (6ft straight), Switzerland 40X0271 Cord (8ft straight ), UK 5056-XXX 7-17 Parts catalog...
  • Page 19 5056-XXX Assembly 10 (continued): Electrical A 7-18 Service Manual...
  • Page 20 Cord (10A 3 cond. 6ft straight) , Korea 40X0281 Cord (13A 3 cond. 6ft straight), Taiwan 40X0282 Cord (1.77M straight), People’s Republic of China 40X0296 Cord (6ft straight), Australia 40X1104 Interuptor, photo (paper low sensor) 40X1267 Parts packet 56P9964 Transformer (Japan Only) 5056-XXX 7-19 Parts catalog...
  • Page 21: Assembly 11: Electrical B

    5056-XXX Assembly 11: Electrical B 7-20 Service Manual...
  • Page 22 40X1100 Cable assembly, cassette bottom sensor 40X1098 Cable assembly, paper feed type 1 40X1114 Cable assembly, carrying clutch 40X1116 Cable assembly, MPF clutch 40X1113 Cable assembly, registration clutch 40X1115 Cable assembly, registration sensor 40X1267 Parts packet 5056-XXX 7-21 Parts catalog...
  • Page 23: Assembly 12: Rip Board

    5056-XXX Assembly 12: RIP board Index Units Description 12—1 56P9749 Cable assembly, power RIP 40X2644 Card assembly, RIP 40X1520 Fan, RIP box 40X1165 Box, RIP 40X1054 Cable assembly, 26 pin RIP printer controller 40X1255 Cable, USB 40X1256 Cable, operator panel...
  • Page 24: Assembly 13: Fuser Unit

    Assembly 13: Fuser unit Index Units Description 13—1 40X1056 Fuser, 120V 40X1057 Fuser, 230V Parts catalog 5056-XXX 7-23...
  • Page 25: Assembly 14: Cassette

    5056-XXX Assembly 14: Cassette 7-24 Service Manual...
  • Page 26 Assembly 14: Cassette Index Units Description 14—1 40X1058 Cassette, paper feed 40X1501 Kit, rack guard holder 40X1105 Flag, bottom sense 5056-XXX 7-25 Parts catalog...
  • Page 27 5056-XXX Assembly 15: Expansion feeder 1 7-26 Service Manual...
  • Page 28 Gear, Z30 40X1093 Gear, IDS 38 40X1097 Motor, paper tray lift 40X1092 Cable asm, expansion lift motor 40X1095 Belt, timing S3M:177 40X1246 Gear, Z28:20T 40X1167 Cover, rear 11G0399 Plate, ground 40X1094 Pulley, timing 20t 40X1269 Parts packet 5056-XXX 7-27 Parts catalog...
  • Page 29 5056-XXX Assembly 16: Expansion feeder 2 7-28 Service Manual...
  • Page 30 Roller, paper feed 40X1088 Assembly, turn guide switch option 40X1173 Interrupt, photo 40X1089 Cable asm, paper feed type 2 40X1107 Sensor, relay 40X1081 Clutch, roller 6 x 10 x 14 40X1087 Clutch, paper feed 40X1270 Parts packet 5056-XXX 7-29 Parts catalog...
  • Page 31 5056-XXX Assembly 17: Duplex unit 1 7-30 Service Manual...
  • Page 32 40X1168 Frame, duplex 40X1172 Cable assembly, duplex connection 40X1169 Screw, duplex mounting 40X1170 Motor, duplex stepping 40X1171 Interrupter, photo 56P9806 Cable assembly, paper detection 56P9994 Plate, duplex guide 56P9807 Cable assembly, duplex interface 40X1271 Parts packet 5056-XXX 7-31 Parts catalog...
  • Page 33 5056-XXX Assembly 18: Duplex unit 2 7-32 Service Manual...
  • Page 34 Pulley, feed roller 56P9822 Belt, timing 56P9823 Belt, timing 56P9821 Knob, paper re-feed 56P9820 Pulley, re-feed roller 40X1174 Roller, drive feed 56P9824 Plate, paper carrying drawer 40X1176 Roller, middle feed 40X1177 Roller, re-feed 40X1271 Parts packet 5056-XXX 7-33 Parts catalog...
  • Page 35 5056-XXX Assembly 19: High-capacity feeder 1 7-34 Service Manual...
  • Page 36 Cover, upper 40X1214 Cover, upper rear 40X1218 Cover, lower rear 40X1245 Cover, right 40X1213 Cover, front 56P9836 Fence, end 56P9940 Ring, snap 40X1217 Cover assembly, upper 40X1216 Lever, vertical transport 56P9842 Spring, tension 40X1272 Parts packet 5056-XXX 7-35 Parts catalog...
  • Page 37: Assembly 20: High-Capacity Feeder

    5056-XXX Assembly 20: High-capacity feeder 2 7-36 Service Manual...
  • Page 38 Arm, pick-up 56P9501 Spring, pressure 40X1184 Interrupter, photo 56P9849 Roller, manual feed pickup 56P9850 Roller, manual feed 56P9852 Limiter, torque 56P9851 Roller, manual feed separate 56P9847 Spring, compression 56P9845 Sensor assembly, paper feed 40X1273 Parts packet 5056-XXX 7-37 Parts catalog...
  • Page 39 5056-XXX Assembly 21: High-capacity feeder 3 7-38 Service Manual...
  • Page 40 Assembly 21: High-capacity feeder 3 Index Units Description 21—1 40X1244 Sensor assembly, photo 40X1186 Interrupter, photo 56P9529 Caster, HCF 56P9856 Spring, tension 40X1188 Switch, micro 40X1187 Switch, push 40X1190 Connector, inlet 40X1189 Connector, I/F 56P9853 Screw, shoulder 40X1274 Parts packet 5056-XXX 7-39 Parts catalog...
  • Page 41: Assembly 22: High-Capacity Feeder

    5056-XXX Assembly 22: High-capacity feeder 4 7-40 Service Manual...
  • Page 42 Cable assembly, power supply 40X1193 Converter, DC/DC 40X1062 Power supply, HCF 40X3488 Cable assembly, drawer ground 56P9861 Roller, track 40X3485 Switch, micro 40X1187 Switch, push 56P9501 Spring, pressure pickup 40X1191 Switch, HCF push 40X1275 Parts packet 5056-XXX 7-41 Parts catalog...
  • Page 43 5056-XXX Assembly 23: High-capacity feeder 5 7-42 Service Manual...
  • Page 44 Assembly 23: High-capacity feeder 5 Index Units Description 23—1 56P9883 Spring, pressure 40X1184 Interrupter, photo 40X1198 Bracket, rear idler 56P9884 Belt, timing 56P9886 Gear, drive 56P9885 Pulley, timing 40X1196 Motor, HCF DC 40X1197 Bracket, front idler 40X1521 Parts packet 5056-XXX 7-43 Parts catalog...
  • Page 45 5056-XXX Assembly 24: High-capacity feeder 6 7-44 Service Manual...
  • Page 46 Description 24-1 40X1199 Plate, upper side fence 56P9893 Knob, stopper 56P9891 Knob, tray 56P9890 Plate, paper adhesion 56P9915 Fence assembly, front side 56P9894 Fence assembly, rear side 40X1184 Interrupter, photo 56P9889 Pad, friction 40X1522 Parts packet 5056-XXX 7-45 Parts catalog...
  • Page 47: Assembly 25: Finisher Covers

    5056-XXX Assembly 25: Finisher covers 7-46 Service Manual...
  • Page 48 Cover, front 56P4067 Tray, upper 56P4068 Tray, lower 56P4062 Panel, left upper 40X1227 Assembly, lower left panel 56P4066 Cover, rear 56P4063 Assembly, staple cover 56P9365 Cover, staple A 56P9367 Cartridge, staple 40X2622 Stapler 56P9364 Cover, staple B 5056-XXX 7-47 Parts catalog...
  • Page 49: Assembly 26: Finisher Frame

    5056-XXX Assembly 26: Finisher frame 7-48 Service Manual...
  • Page 50 Spring 40X2626 Screw, M4 40X2607 Assembly, exit guide inverter 56P9399 Sensor, photo 40X1223 Assembly, exit guide straight 40X2608 Unit, 3 hole punch (U.S. only) 40X2609 Unit, 4 hole punch (non U.S.) 56P4072 Kit, punch speed up 5056-XXX 7-49 Parts catalog...
  • Page 51 5056-XXX Assembly 27: Finisher feed 1 7-50 Service Manual...
  • Page 52 Roller, I 56P9312 Roller, F 56P9405 Roller, G 40X2616 Clutch, registration 56P9407 Belt, timing 60S2M184 40X2617 Assembly, feed motor 56P9339 Belt, timing 60S2M334 56P4060 Assembly, punch drive 56P9318 Spring, B 56P4070 Pulley gear Z36/T24 56P4061 Belt 5056-XXX 7-51 Parts catalog...
  • Page 53 5056-XXX Assembly 28: Finisher feed 2 Index Units Description 28-1 40X2600 Assembly, jogging unit 56P9333 Belt, timing 60S3M408 40X2612 Assembly, tractor motor 40X2601 Assembly, guide stack 7-52 Service Manual...
  • Page 54: Assembly 29: Finisher Elevator

    Assembly 29: Finisher elevator Index Units Description 29-1 40X2606 Assembly, elevator motor 56P9451 Shutter 56P9332 Spring, C 40X2614 Wire 56P9459 Drum, wire 56P9460 Gear, Z30 56P4073 Panel, lower left 40X2639 Assembly, sensor 40X2605 Assembly, hook rear 5056-XXX 7-53 Parts catalog...
  • Page 55: Assembly 30: Finisher Electronics

    5056-XXX Assembly 30: Finisher electronics Index Units Description 30-1 40X2604 Assembly, upper limit sensor 40X2603 Supply, power 56P9358 Cord, Y power 56P9368 Cord, Y power (230 V only) 40X1225 Board, finisher control 56P9410 Cable 40X2618 Bracket, finisher control board 56P9357...
  • Page 56 5056-XXX Assembly 31: Finisher docking 1 Index Units Description 31-1 56P9467 Screw, thumb 7-55 Parts catalog...
  • Page 57 5056-XXX Assembly 32: Finisher docking 2 Index Units Description 32-1 40X1237 Bracket, rail 56P9472 Screw, lock 40X1238 Screw, rail 40X1239 Chassis, rail 56P9474 Roller 40X1241 Stud, lock-f 56P9473 Stud, lock 40X1240 Screw, lock 40X1254 Bracket, lock 7-56 Service Manual...
  • Page 58: Assembly 33: Miscellaneous/Options

    Adapter, MarkNet N8050 Americas 40X1562 Adapter, MarkNet N8050 Europe 40X1561 Antenna, external 40X0179 Grease, Nyogel 744 40X1109 Kit, paperpath maintainence 40X3483 Cable, hi cap feeder interface 40X0290 Card, RS 232 serial interface 40X0291 Card, 1284-B parallel interface N8000 10/100 5056-XXX 7-57 Parts catalog...
  • Page 59: Assembly 34: Parts Packets

    5056-XXX Assembly 34: Parts packets Index Units Description 40X1262 Parts packet, containing: • 5 Bind S-tight screws, 3x6, Zn-3R • 5 Bind S-tight screws, 3x15, Zn-3K • 5 Bind P-tight screws, 3x8, Zn-3K • 5 Bind P-tight screws, 3x10, Zn-3K •...
  • Page 60 • 5 Bind screws, M3x10, Zn-3K • 5 Bind screws, M3x6, Ni-3 40X1269 Parts packet, including: • 50 Bind S-tight screws, 3x6, Zn-3R • 50 Bind screws, M3x6, Zn-3K • 50 Bind screws, M3x8, Ni-3 • 50 E-rings, ES-5, ACP 5056-XXX 7-59 Parts catalog...
  • Page 61 5056-XXX Assembly 34: Parts packets (continued) Index Units Description 40X1270 Parts packet, including: • 5 Bind S-tight screws, 3x6, Zn-3R • 5 Bind S-tight screws, 3x8, Zn-3R • 5 Bind P-tight screws, 3x6, Zn-3K • 5 Bind P-tight screws, 3x8, Zn-3K •...
  • Page 62 Parts packet, including: • 5 Bind S screws, 3x8 • 5 Bind S screws, 4x6 • 5 Pan screws 4x20 • 5 RS-tight screws, M4x6 • 5 RS tight round top screws • 5 E-rings, ES-6, ACP 5056-XXX 7-61 Parts catalog...
  • Page 63 5056-XXX Assembly 35: Finisher parts packet P/N 402623 Screw Screw Tapping Screw Tapping Screw Tapping Screw Tapping Screw Set Screw Plain Washer 7-62 Service Manual Retaining Ring -E Type Spring Pin Screw Spring Lock Washer Toothed Lock Washer Resin Ring...

This manual is also suitable for:

C920

Table of Contents