Understanding The Printer Operator Panel - Lexmark C920 Service Manual

5056-XXX

Understanding the printer operator panel

The operator panel on your printer is a 4-line, back-lit, gray scale display that can show both graphics and text.
The Back, Menus, and Stop buttons are located to the left of the display, the navigation buttons are located
below the display, and the numeric pad is located to the right of the display.
The use of the buttons and the layout of the display panel are described in the following table.
Button
Back
Menu
Stop
Navigation buttons
Numeric pad
2
1
4 5
8
7
0
3-2
Service Manual
Function
Press the Back button to return to the last screen you viewed.
Note: Changes made on a screen will not be applied if you
press the Back button.
Press the Menu button to open the menu index.
Note: The printer must be in the Ready state to access the
menu index. A message indicating the menus are unavailable
will appear if the printer is not ready.
Press the Stop button to stop the mechanical operation of the
printer. After pressing Stop, the message Stopping is
displayed. When the printer has stopped, the status line in the
operator panel will show Stopped, and a list of options will
appear.
The Up or Down buttons are used to move up and
down lists.
When navigating through a list using the Up or
Down button, the cursor moves one line at a time.
Pressing the Down button at the bottom of the screen
changes the screen to the next whole page.
The Left or Right buttons are used to move within
a screen such as moving from one menu index
item to another. They are also used to scroll
through text that will not fit on the screen.
The Select button is used to initiate action on a
selection. Press Select when the cursor appears
next to the selection you want such as following a
link, submitting a configuration item, or when you
want to start or cancel a job.
The numeric pad consists of numbers, a pound '#' sign, and a
backspace button. The 5 button has a raised bump for non-
visual orientation.
3
The numbers are used to enter numeric values for items like
6
quantities or PINs. The backspace is used to delete the
number to the left of the cursor. Pressing the backspace
multiple times will delete additional entries.
9
The pound '#' sign is not used.
#