Clearing Paper Jams; Paper Jam - Lexmark C920 Service Manual

5056-XXX

Clearing paper jams

200 Paper Jam

This message identifies the areas (A—F, MPF, or T1—T5) you need to check to remove the paper or to clear the
message.
Check Areas A, B
This message indicates a paper jam in the transfer belt, fuser, or output roller area. To clear areas A—B:
1.
Open the front door.
2.
Rotate the top cover locking lever to the left.
3.
Place both hands on the lifting points, and squeeze the right top cover latch.
4.
Lift the cover.
Warning: Do not use pointed objects to remove the paper. They may damage the transfer belt.
Note: The paper may be covered with unfused toner, which can stain garments.
5.
Remove any paper on the transfer belt.
If the paper source was the multipurpose feeder, check the area between the multipurpose feeder and the
transfer belt.
6.
Check the fuser area and top cover for additional jams.
If there is no jammed paper in the fuser area or top cover, go to step 12. If jammed paper is present,
continue with step 7.
7.
Lift the fuser pressure release lever.
3-34
Service Manual