Printer Setup; Defaults; Light Quantity; Page Counts - Lexmark C920 Service Manual

Printer Setup

Defaults

The value of this setting determines whether the printer uses the US or Non-US factory default value for the
following printer settings:
Printer Setting
Paper Sizes
(Paper feeding sources which do not have hardware
size sensing capability)
Envelope Size
(Envelope feeding sources which do not have
hardware size sensing capability)
PCL Symbol Set
PPDS Code Page
Universal Units of Measure
Note: Changing this setting's value has the same effect as selecting "Restore Base" or "Restore Network" in the
Factory Default Configuration menu setting.

Light Quantity

•
Cyan
•
Magenta
•
Yellow
•
Black
Range = 0 to 45
Note: The light quantity does not need to be set when replacing a LED printhead.

Page Counts

The values of these settings indicate the total number of mono (including blank) and color pages generated by
the printer. The permanent page count can also be viewed in this sub-menu. After all manufacturing printing
tests have been completed, this value is set to 0.
Note: Unlike in past implementations, the values of these settings cannot be changed by a user or a CE. To
return to the main PRINTER SETUP menu, a user can press Back.
US value Non-US value
Letter A4
10 Envelope DL Envelope
PC-8 PC-850
437 850
Inches Millimeters
5056-XXX
3-17
Diagnostic aids