Printing The Menu Settings; Operator Menu Disabled - Lexmark C920 Service Manual

Button
Display panel

Printing the menu settings

1.
From the printer operator panel, press
2.
Continue to press and release
3.
Press the
4.
Press
5.
Press
returns to Ready status after the menu settings page prints.

Operator menu disabled

If the operator has disabled the menu, and you want to run operator print tests, turn the machine off, and then
press Go and Stop as you turn the machine on.
Function
The display panel shows messages and graphics describing
the current state of the printer and indicating possible printer
problems you must resolve.
The top line of the display is the header line. If applicable, it
will contain the graphic indicating the Back button can be
used. It will also display the current status, and the Supplies
(Warnings) status. If multiple warnings are present, each
warning will be separated by a comma.
The other three lines of the display are the body of the screen.
This is where you view printer status, supplies messages,
show-me screens, and make selections.
until you see TESTS MENU.
button and scroll to Reports.
. Menu Settings is displayed on the first line.
again to print the page. The message Printing Menu Settings is displayed. The printer
to enter the menus.
5056-XXX
3-3
Diagnostic aids