Error Message 24X (X=Tray 1 Through 5) Paper Jam Check Tray X; Error Message 250 Paper Jam - Check Mp Feeder; Error Message 260 Paper Jam - Check Envelope Feeder; Error Message 27X Paper Jam - Check Bin X - Lexmark T63x Service Manual

4060-xxx

Error Message 24x (x=tray 1 through 5) Paper Jam Check Tray x

The paper has not cleared the pass thru sensor or reached the pass thru sensor of the option above
tray x.
Note: When the StapleSmart Finisher option is installed, a secondary message may be displayed
which advises whether or not to remove the job from the finisher. If a job has accumulated in the
finisher, then the printer alternately flashes the primary and secondary messages to indicate that all
accumulated sheets should not be removed during the jam clearance procedure. If the sheets are
removed, then the printer does not reprint these sheets.

Error Message 250 Paper Jam - Check MP Feeder

The paper is jammed in the multipurpose feeder and has not reached the base machine input sensor
or has not reached the input sensor in time.
Note: When the StapleSmart Finisher option is installed, a secondary message may be displayed
which advises whether or not to remove the job from the finisher. If a job has accumulated in the
finisher, then the printer alternately flashes the primary and secondary messages to indicate that all
accumulated sheets should not be removed during the jam clearance procedure. If the sheets are
removed, then the printer does not reprint these sheets.

Error Message 260 Paper Jam - Check Envelope Feeder

An envelope is jammed in the envelope feeder or has not reached the base machine input sensor.

Error Message 27x Paper Jam - Check Bin x

Paper is jammed in output bin x (x=bin 1 through 3). Generally this message appears when the paper
has not cleared the exit sensor in time, has jammed in the redrive assembly, or has not fed into the
output bin selected.
Note: A 271 paper jam (bin 1) may be displayed when the StapleSmart finisher is installed and a
piece of media is actuating the pass thru sensor of the finisher.

Error Message 28x Paper Jam (x=StapleSmart finisher)

Error Message 280 Paper Jam - Check Finisher
or
Error Message 281 Paper Jam - Check Finisher
When either of these two messages are displayed, they indicate that paper is jammed in the finisher
option. Open the finisher rear door and top cover to remove the jam. Note: If the paper is still
covering the finisher pass thru sensor, then a 271 Error message is displayed. A 281 Paper Jam
message may also be displayed when there is a problem with the stapler assembly or the stapler
card.
Note: When the StapleSmart finisher option is installed, a secondary message may be displayed
which advises whether or not to remove the job from the finisher. If a job has accumulated in the
finisher, then the printer alternately flashes the primary and secondary messages to indicate that all
accumulated sheets should not be removed during the jam clearance procedure. If the sheets are
removed, then the printer does not reprint these sheets.
3-25
Diagnostic aids