Clearing Paper Jams - Lexmark Optra Color 1200 Service Manual

5050-001
Processing speed is reduced 75% in OHP mode. The fuser
temperature is set at 20 degrees higher than normal printing. This is
to improve the smoothness of the toner image by ensuring the toner
melts enough in the fuser.
When you load transparencies in the multipurpose feeder, the printer
recognizes this type of media you have loaded and automatically
makes these adjustments. However, waiting for the printer to sense
the presence of transparencies may further delay the job. We
recommend always selecting the correct Paper Type before sending
a job to print.
Post Card Mode
In this mode the fuser temperature is also set 20 degrees higher and
the setting of transfer voltage switches according to the humidity.

Clearing Paper Jams

When a jam occurs, the
display indicates where to find the jammed paper. You must clear the
paper from this area, but you must also clear all paper from the
entire paper path .
After you have cleared all the paper, close the printer's top cover and
press to clear the message. If you feel you have cleared all the
Go
paper from the paper path, but the paper jam message is still
displayed, open and close the top cover and press
The Jam Recovery setting in the Setup Menu determines whether
the printer reprints the jammed page.
message on the operator panel
Paper Jam
again.
Go
General Information
1-27