Installing An Sd Card - FLIR Scout Bi-Ocular Operator's Manual

3—Operating Your Camera
SD Card Capacity and Type
The Scout Bi-Ocular camera supports storing images and video on
standard 1-Gb and 2-Gb SD cards or up to 32-Gb on SDHC cards.

Installing an SD Card

To install an SD card, insert the card into the slot and press on the SD
card until its edge is nearly flush with the surface and release.
To remove an SD card, use this same motion.
Downloading Stored Files via USB
The Scout Bi-Ocular camera also supports downloading stored
images and video via the USB port.
With the camera on, plug the USB cable into the USB connector on
the camera and a USB port on your computer.
Allow up to two minutes for the USB connection to be recognized by
the computer's operating system.
22
Quality FLIR Products Online at:
Scout Bi-Ocular Operator's Manual
GlobalTestSupply
www.
March 2012
.com
sales@GlobalTestSupply.com