Sd Card Door - FLIR Scout Bi-Ocular Operator's Manual

Thermal night vision camera
Hide thumbs Also See for Scout Bi-Ocular:
Table of Contents

Advertisement

Scout Bi-Ocular Operator's Manual
3–8
The SD Card door is located on the bottom of the camera in front of
the battery compartment. The SD card, the USB connector, and the
Auto-Standby Enable switch are located under the door.
Note
The Hot Shoe must be removed to access the SD Card door.
To open the SD Card door, grasp
the two edges with your thumb and
finger and pull straight up.
Caution!
Do not stretch or break the rubber
lanyard that keeps the door captive
to the camera when opened.
To close the SD Card door, slide the
lanyard strap back into the camera, position the door in place, and
then firmly press in the middle of the door until it is fully seated.
431-BTS0-00-10, Revision 110
Quality FLIR Products Online at:

SD Card Door

Auto-Standby Enable
switch
GlobalTestSupply
www.
3—Operating Your Camera
mini-USB
SD Card
Grasp SD card door edges and pull
.com
sales@GlobalTestSupply.com
21

Advertisement

Table of Contents
loading

Table of Contents