3—Operating Your Camera
3–2
Installing the SD Card
Install the SD card included with your camera package as follows:
1. Remove the small SD card door.
No tools are required.
2. Install the SD card into card
slot with label facing the
front of the camera.
3. Snap the SD card door back
into place, ensuring that
the rubber lanyard retracts
into the camera.
10
Quality FLIR Products Online at:
Scout Bi-Ocular Operator's Manual
GlobalTestSupply
www.
Grasp spring loaded buttons
on SD card door edges and pull
March 2012
.com
sales@GlobalTestSupply.com