Installing The Batteries - FLIR Scout Bi-Ocular Operator's Manual

Scout Bi-Ocular Operator's Manual
3–3
The batteries must be installed and charged before using your
camera.
1. Pull off the battery cover by
lifting the latch as shown at the
right.
2. Install the batteries
paying attention to
the positive and
negative markings,
as shown at the
right.
3. Re-install the battery
cover by engaging
the hinge and
snapping the latch
back in place.
If you have installed rechargeable batteries, they must be charged
before using the camera. Regular AA batteries may be used but will
only provide about one and a half hours of camera use.
431-BTS0-00-10, Revision 110
Quality FLIR Products Online at:

Installing the Batteries

GlobalTestSupply
www.
3—Operating Your Camera
Battery
cover
latch
.com
sales@GlobalTestSupply.com
11